You can download four high-resolution A3 JPG maps of McCulloch County, Texas, in one ZIP directly from this page. The package includes a general county map, a ranked city map, a terrain-and-water map, and an elevation map. Together they show Brady, Melvin, Rochelle, roads 87, 283, 377, 417, 765, 190, and 71, Brady Reservoir and Brady Creek, western creeks, San Saba River, and an actual elevation range of about 384 to 647 meters.
Brady is the easiest place to begin because it sits slightly south of the county center where several road corridors meet. Route 87 approaches from the Melvin side, Route 283 runs north from the Brady area, and Route 377 heads northeast. Rochelle lies to the east along the 417 corridor, while routes 190 and 71 provide references near the southern edge. The water and elevation maps show that the road network crosses a much more rugged landscape than a quick highway view suggests: high western hills are cut by creeks, Brady Creek crosses the lower middle, and San Saba River occupies the southern drainage.
Table of Contents
Brady provides the clearest starting point for the road network
Brady is the largest developed area on the general county map. The city occupies the lower-middle portion, with the McCulloch County Courthouse label close to the eastern side of the urban area. Route 87 reaches Brady from the west, while Route 283 runs north from the same broad corridor. These two roads provide a simple framework for locating the county seat before following smaller roads and water features.
Route 377 leaves the Brady area toward the northeast and continues deep into the county. Route 765 appears farther north on a long north-south line. Rochelle is marked to the east and is connected toward Brady by Route 417, while Melvin sits near the western side along Route 87. The three settlement references create a useful west-center-east sequence even though Brady is by far the largest mapped urban area.
The southern road pattern is less regular. Route 190 crosses the southwest side, and Route 71 is labeled near the southeastern edge. Numerous blue drainage lines become more obvious south of Brady, indicating that the terrain is increasingly divided by creek valleys. This is where the terrain-and-water map becomes especially useful because it separates the drainage network from the road layer.
The ranked city map simplifies the county to Brady and Melvin
The city map ranks Brady first and Melvin second. The lower index also prints the values 5,230 and 114 beside the two names. The supplied image does not identify a year for those figures, so this article treats them only as values shown in the city index rather than presenting them as confirmed current population counts.
The spatial contrast is more useful than the ranking itself. Brady lies slightly south of center, while Melvin is near the western boundary. With most road labels removed, the distance between them is easy to judge. The general map then adds the missing detail by showing Route 87 connecting the same broad west-to-Brady direction.
Coleman County is labeled to the north, San Saba County to the east, Concho County to the southeast, Menard County to the southwest, and Mason and Brown counties to the west. These surrounding names provide regional orientation. The city view is best for a quick Brady–Melvin comparison, while Rochelle and the full road network belong on the general map.
Brady Reservoir and Brady Creek form the main south-central water reference
Brady Reservoir is the most useful named water feature near the center-south of the terrain-and-water map. Brady Creek continues east from the reservoir in a broad winding corridor, with numerous small tributaries entering from both sides. When the water layer is matched back to the general map, the reservoir and creek sit just south and east of the Brady urban area.
Several numbered reservoirs provide additional local references. Reservoir No 41 and Reservoir No 43b are labeled northwest of Brady Reservoir, while Reservoir No 45 and Reservoir No 44 appear farther northeast. Reservoir No 5 and Reservoir No 6 are located to the southwest. These small water bodies are useful for identifying different parts of the central and western drainage even though their labels are simple numbers rather than place names.
Western creeks and eastern tributaries feed lower southern drainage
Salt Creek and Saddle Creek are two of the strongest named channels on the western side. Salt Creek follows the far western area, while Saddle Creek runs farther east through a separate valley. Bluff Creek is labeled in the north-central interior. On the eastern side, Deep Creek descends through a long valley, and Herberg Lake provides a small standing-water reference nearby.
San Saba River is labeled along the southern portion of the supplied water map. It is a much more direct mapped reference than the Colorado River wording used in the old title. For this rewrite, the article therefore centers the actual visible drainage—Brady Creek, San Saba River, and the named creeks—rather than carrying forward a river-basin phrase that is not the main feature on the provided map.
This water layer is intended for geographic reference. It can be used to locate Brady Reservoir, Brady Creek, Salt Creek, Saddle Creek, Deep Creek, Herberg Lake, San Saba River, and the numbered reservoirs relative to the county boundary. It should not be used as a flood-hazard map, parcel-boundary map, legal water-boundary product, or navigation chart.
High west-central and southwestern hills contrast with lower creek valleys
The elevation map reports an actual range of about 384 to 647 meters and a mean elevation of about 514 meters. The darkest browns are concentrated in the west-central and southwestern parts of McCulloch County, with additional high ridges through the middle. Greens are more common across the north and along the major eastern and southeastern drainage corridors.
The western high ground is strongly dissected rather than smooth. Salt Creek and Saddle Creek occupy lower corridors that cut into the higher hills, while smaller tributaries create repeated narrow valleys. Around the lower middle, Brady Creek also follows lower terrain between elevated ridges. Matching the water and elevation maps makes these relationships easy to see.
Deep Creek on the eastern side and San Saba River toward the south occupy greener, lower terrain. The displayed difference between the minimum and maximum elevation is about 263 meters. That is enough relief for the hills and valleys to stand out clearly even though the county is not a mountain landscape. The road map alone does not convey this topographic contrast nearly as strongly.
The elevation layer is best used for relative terrain comparison rather than survey-grade or engineering-grade measurement. It helps explain how Brady, Melvin, Rochelle, the western creek valleys, Brady Creek, and the San Saba River corridor fit into a county with substantial local relief.
Following the map south from Brady connects roads, water, and relief
Start at Brady on the general map and move south and southeast toward the routes labeled 190 and 71. The road layer shows a broad rural network and increasingly winding blue drainage lines. On the water map, Brady Reservoir and Brady Creek become the main south-central references, with San Saba River farther south. The elevation map then shows these channels as lower green corridors between higher hills.
The western side provides the opposite comparison. Melvin lies near Route 87 on the general map, while Salt Creek and Saddle Creek divide the nearby terrain on the water view. The elevation layer marks much of the same west-central and southwestern area with the highest brown colors in the county. These maps together give McCulloch County a hill-and-creek character that is more specific than a generic river-basin description.
Use the ranked city map when only Brady and Melvin need to be placed, the general map when road numbers and Rochelle matter, the terrain-and-water map for creeks and reservoirs, and the elevation map for the contrast between high hills and lower drainage corridors. Small labels are often easier to inspect in the downloadable high-resolution JPG files than in the browser previews.
Frequently Asked Questions
Which communities are ranked on the McCulloch County city map?
The map ranks Brady first and Melvin second. Brady lies slightly south of the county center, while Melvin is close to the western boundary. The index also prints 5,230 and 114, but no year is shown, so this article does not present those values as confirmed current population counts.
Which water features are easiest to identify?
Brady Reservoir and Brady Creek are the clearest south-central references. Salt Creek and Saddle Creek are prominent in the west, Deep Creek and Herberg Lake are on the eastern side, and San Saba River is labeled along the southern portion of the supplied map.
What elevation range is shown for McCulloch County?
The supplied elevation map reports an actual range of about 384 to 647 meters and a mean of about 514 meters. The west-central and southwestern hills are generally higher, while Brady Creek, Deep Creek, and the southern river corridor occupy lower terrain.
Sources and Reference Data
- U.S. Census Bureau TIGER/Line Shapefiles — official county-boundary and road geometry for geographic reference.
- USGS National Hydrography — official resources for rivers, creeks, reservoirs, lakes, and other water features.
- USGS 3D Elevation Program — official elevation resources used for terrain information.
- USGS The National Map Viewer — an official viewer for comparing geographic layers.
Map File Information
Download four high-resolution A3 JPG maps of McCulloch County, Texas, in one ZIP file.
- Included Files: county map, ranked city map, terrain and water map, elevation map
- File Type: JPG
Related Maps
- San Saba County Texas map
- Runnels County Texas map
- Taylor County Texas map
- Schleicher County Texas map
- Tom Green County Texas map
Green Map creates custom-edited map images using open geographic data sources such as geoBoundaries, Natural Earth, OpenStreetMap, and government open data.
These maps are edited visual materials, not raw data files, and are provided for education, documents, presentations, and graphic reference.
