Lawrence County Arkansas Land Cover Map places two contrasting landscapes on the same page: a largely agricultural eastern half and a much more wooded west. Agriculture accounts for 65.43% of the county in the supplied 2025 summary, yet the forest, wetlands, and winding waterways west of the central divide are essential to understanding the full picture.
Four complementary views are provided here: current land cover, forest versus farmland, developed land and impervious surface, and mapped class differences from 1985 to 2025. You can examine the images in the article or download all four original JPG maps together in one ZIP. Each view is useful for a different question, so begin with the feature you need rather than reading every color as equally important.
Table of Contents
Where the agricultural plain meets the wooded western landscape
A quick scan of the county outline reveals why one countywide percentage can be misleading. Broad yellow agricultural areas occupy the east, with a conspicuous developed cluster near the middle of that side. In the west, forest stretches over much larger continuous patches, interrupted by irregular agricultural openings and wetland corridors. Neither side is completely uniform.
Along the middle of Lawrence County, waterways curve through low-lying areas where agriculture, forest, and wetlands meet. Those shapes form a more irregular transition than the straight lines of the eastern agricultural landscape. Comparing the two sides suggests where to start a closer examination; it does not establish a legal boundary between farmland and woodland or explain why any particular parcel has its present cover.
Eastern fields appear in extensive blocks separated by narrow lines and occasional small wooded or wetland features. Westward, smaller openings are embedded within broad tree cover, and the map becomes more varied. Readers trying to explain local geography should locate this transition first. The four specialist maps then supply different kinds of detail about that same landscape.
Read the 2025 cover map by location, not color alone

On the general land-cover map, agriculture dominates at 65.43% of the county. Its mapped extent is particularly striking in the northeast and southeast. Yellow agricultural cover fills much of the area around a central concentration of development, while thin lines and smaller colored patches interrupt otherwise extensive fields. A large percentage says something about the countywide total, but location tells you which places contribute to that total.
Forest represents 21.49% of Lawrence County in the supplied summary. Dark green cover is thickest in the western half, where large wooded tracts extend around smaller openings. Around the middle of the map, greenery becomes more broken up as wetlands, fields, water, and developed locations approach one another. The forest figure describes mapped surface cover; it is not a count of managed timber stands or a statement about who owns the land.
Wetlands account for 6.14%. They appear as blue-green patches that follow sinuous water features, particularly through the western and central portions. A number of these patches lie directly beside farmland or forest. Water itself is listed at 1.05%, a much smaller area share, but narrow channels and distinct water bodies offer valuable reference points when comparing maps that simplify the remaining landscape.
Developed cover is 5.35%. The main concentration stands out near the central-eastern part of the county, and a smaller cluster is visible farther north. Narrow linear traces extend between or away from those clusters. Some may align with transport corridors, but the map alone does not identify every roadway, building, or municipal limit. Use it to locate concentrations, not to label individual structures.
Other colors in the legend represent barren ground, grassland, and shrubland, among additional classes. Small scattered occurrences may be visible where farmland, woodland, and water meet. Their precise shares are not all supplied in the county summary, so it would be misleading to estimate percentages from how large a few colored shapes look. For a reliable reading, describe their location and relationship to nearby features instead.
Cropland becomes clearer once the legend is simplified

The forest-and-farmland view strips away much of the visual competition from the general map. Tree-covered terrain dominates the left side; cropland fills broad areas to the right. In between, wetland corridors and smaller agricultural patches complicate the boundary. That is why this second map is often easier to use when comparing the extent and arrangement of two major surface-cover types.
Within the west, agricultural openings do not form the same broad pattern as they do on the east side. Light-colored patches punctuate forest, particularly near the transition zone and along lower-looking corridors. Farther east, agriculture occupies larger connected areas, with roads and isolated water or wetland features crossing it. The simplified colors help a viewer follow the change in cover without confusing small developed features with an additional dominant class.
Cropland and pasture or hay appear separately in the legend, although the 65.43% countywide agriculture total combines agricultural categories in the supplied summary. An exact breakdown of the two agricultural subclasses was not supplied. It would therefore be inappropriate to infer an acreage or percentage for any particular crop or grazing type from this figure alone.
A county-specific reference is available through the University of Arkansas System’s Lawrence County Cooperative Extension Service. Its 2024 report discusses activities involving corn, soybeans, rice, wheat, cotton, livestock, and forage. That background helps readers see why agriculture merits close attention here. It does not identify the crops grown inside any particular colored map cell, nor does it make a surface-cover map a farm-production database.
Wooded areas also deserve a careful distinction. A dark-green patch reports land cover, not tree species, public access, ownership, or harvest permission. Forest can be located broadly from this map, but the boundary of an individual forest property requires a separate survey or land-record source. Where a small agricultural opening interrupts the green, the image cannot by itself explain whether the opening is permanent or how it is managed.
Hard surfaces trace the developed core and narrow corridors

Impervious surface is ground cover that sheds much of the rain falling on it, such as pavement, rooftops, and parking areas. Instead of coloring all developed land equally, this map distinguishes places with different fractions of hard surface. Much of the county remains very pale, while stronger red tones cluster in the central developed area and along thin connecting lines.
Another concentration appears north of that main cluster. Across the eastern agricultural plain, faint linear marks stand out against an otherwise light background, suggesting where hard-surfaced routes pass through fields. Westward, small traces exist among the woods, but they do not produce the same dense pattern. Comparing the distribution side by side with the general land-cover map reveals why developed land can occupy a larger classified area than highly impervious surfaces do.
Mean imperviousness is 1.42% in the supplied county summary. Only 0.66% of the county lies in cells with at least 50% impervious surface. Those figures measure different things from the 5.35% land-cover share classified as developed. A developed cell may contain yards, trees, soil, and other surfaces through which water can infiltrate, in addition to roads and buildings.
For a classroom example, compare a broad red developed patch on the general map with the more concentrated hard-surface pattern in this panel. Students can see that ‘developed’ does not mean ‘completely paved.’ The contrast is also useful when discussing rural and town landscapes, provided that the percentages are identified correctly and not treated as interchangeable measures.
Hydrology requires more information than this surface layer supplies. A high impervious fraction may affect runoff under some conditions, but mapped hard surface is not a flood-risk rating. Elevation, soil, drainage systems, channel conditions, and the timing of rainfall are missing from this single view. Anyone assessing property hazards or engineering a drainage solution needs the appropriate official hazard and site-specific data.
Most cells retain their mapped class in the 1985–2025 comparison

A mostly white background is the first thing to notice in the class-difference panel. White denotes cells classified the same way at both endpoints, not gaps in the map. Across Lawrence County, the supplied summary gives a total class difference of 6.19%. Thus the colored changes occupy a relatively small share of the county, even though some local concentrations stand out.
Scattered patches on the western side include mapped forest loss and other kinds of class difference. Thin red patterns follow parts of the central and eastern developed network, while isolated changes appear among the agricultural fields. Read the legend before interpreting these shapes: orange or purple areas cannot automatically be described as new buildings, and colored pixels do not establish the cause of a transition.
For the endpoint comparison, the provided figures identify 1.25% classified as developed, 1.73% forest loss, 0.85% agricultural loss, and 2.01% other difference. Those categories help break down the 6.19% total. They are not a timeline of annual events and do not imply that every affected location underwent a permanent land-use conversion or an identifiable construction project.
Because only the start and end classes are compared, changes between those dates can be invisible when a cell ends in the same class it began with. Classification revisions or differences in imagery may also contribute to apparent transitions. Caution is especially important along complex boundaries between western forest, small fields, water, and wetlands, where a cell can include more than one surface type.
Follow three local questions through all four maps
Suppose the question concerns the county’s agricultural character. Begin with the simplified forest-and-farmland image and note the extensive fields on the eastern side. Check the general map to see whether wetland pockets or developed areas interrupt those fields. Finally, consult the class-difference map to identify where endpoints differ, without assuming that a colored difference proves a change in agricultural production.
A second question might focus on the land near winding channels. Start with the general map to distinguish water from wetlands; then follow those shapes through the western forest and the central transition. In the simplified map, wetlands remain visible beside cropland or trees. For ecological interpretation, this shows juxtaposition of cover types, but neither panel establishes the official limits of a regulated wetland or the quality of the habitat.
Town and transport surfaces form a third example. Locate the developed cluster on the general land-cover image, then compare its shape with the denser red core and linear traces on the impervious map. That sequence helps explain why a town may be prominent in a developed-land classification yet contribute relatively little to the countywide mean imperviousness of 1.42%.
Different audiences may prefer different combinations. A classroom handout can pair forest/farmland with general cover; a community presentation may need the general map and the impervious panel; a discussion of long-term mapped differences should place the change panel next to the current classification. Using the right pair produces a clearer explanation than trying to read four legends at once.
Download details and what the images cannot establish
The single download box below provides the original four JPG maps in one ZIP archive. Each original is 2,480 by 1,754 pixels. Those dimensions are useful to know when planning slides or a printout, but the package does not establish that the files satisfy a high-resolution A3 printing standard. Check type size and legend legibility at the output scale you actually intend to use.
Color categories are derived from raster classification, meaning that land is represented by small grid cells rather than precise property outlines. A cell can straddle a paved edge, field, or strip of woodland, yet it receives a mapped category. Zooming in enlarges the cell display; it does not reveal a surveyed lot boundary or make the data more detailed than the original analysis.
Near the western wetland corridors and the complicated transition into the eastern farms, these generalizations are easy to overlook. Surface-cover labels do not specify zoning, legal permitted use, parcel ownership, or building restrictions. For such decisions, use county records, wetland determinations, current imagery, and professional site information as appropriate instead of relying on the colors of this figure.
Remember the observation dates as well. The contemporary map is labeled 2025, while the change comparison covers the 1985 and 2025 endpoints. Subsequent work on a road, field, or building will not automatically appear. These illustrations are strongest as geographic reference and educational material, especially when accompanied by a clear legend and a note that classifications can vary at fine scales.
Frequently Asked Questions
What is the largest 2025 land-cover class in Lawrence County?
Agriculture is the largest class in the supplied county summary at 65.43%. Its distribution is especially extensive in the east, while the west contains much more forest, wetland, water, and smaller agricultural patches.
Why is developed cover 5.35% while mean imperviousness is only 1.42%?
Developed land can contain both hard and permeable surfaces, including buildings, pavement, lawns, trees, and soil. Imperviousness measures the hard surfaces that do not readily absorb water, so its countywide average can be much lower than the developed land-cover share.
Does the 6.19% class difference mean that exactly 6.19% of the county was physically transformed?
Not necessarily. Real landscape change can contribute, but imagery differences, mixed pixels, and classification variation can also affect an endpoint comparison. Use the change map to locate areas for closer review, then verify the cause with annual imagery, aerial photography, or local records.
Map File Information
Download one ZIP archive containing the four original land-cover map JPG files.
- Included Files: Four original land-cover map JPG files
- File Type: ZIP archive containing four JPG files
- Intended Use: Map comparison, learning, and print reference
Related Maps
How to compare the map layers
- Compare farmland and wooded areas using the same legend before judging their relative extent.
- Use the river lowlands and the Black River as geographic reference points.
- Check roads and settlement areas against the impervious-surface view.
- Read the 1985–2025 comparison as mapped class differences rather than evidence of their cause.
- Consult the source and scale before using a county overview for site-level decisions.
Sources and References
- MRLC Annual NLCD Data — Official data catalog for Annual NLCD layers and related products.
- USGS Annual NLCD Land Cover Classification — Official explanations of land-cover categories and their interpretation.
- U.S. Census Bureau TIGER/Line Shapefiles — Reference boundary datasets for counties and other geographic areas.
- Lawrence County Cooperative Extension Service 2024 Report — Local context on agricultural extension, crops, livestock, and forage activities.
Green Map creates custom-edited map images using open geographic data sources such as geoBoundaries, Natural Earth, OpenStreetMap, and government open data. These maps are edited visual materials, not raw data files, and are provided for education, documents, presentations, and graphic reference.





