This page uses Uvalde as the main road and settlement reference for an Uvalde County Map, then follows the county east toward Sabinal and north into a much higher landscape cut by the Nueces, Frio, and Sabinal river systems. Download the high-resolution A3 JPG map ZIP from the box below when you need printable or editable files; it contains separate county-reference, ranked-city, terrain-and-water, and elevation maps.
Uvalde County changes dramatically from south to north. Uvalde sits in the lower south-central part of the county, while Sabinal is the second ranked city farther east. Knippa appears between the two on the county reference map. North of this settled corridor, the terrain rises into deeply cut ridges and valleys. The water map helps explain that relief because the Nueces, Frio, and Sabinal river systems descend from those high northern areas toward the broader southern lowlands.
Table of Contents
Uvalde anchors the US 90 and US 83 road pattern
Uvalde is the easiest place to locate first on the county reference map. US 90 provides the strongest east-west reference through the city and continues toward Knippa, while US 83 forms the main north-south line through the Uvalde area. Route 55 heads northwest into more rugged terrain. Once those three directions are clear, the county’s road pattern becomes much easier to understand.
Knippa lies east of Uvalde on the US 90 corridor. Farther east, route shields 127 and 315 appear as additional references. Around Uvalde, the map also labels the Uvalde County Sheriff’s Office and Southwest Texas Junior College, with Uvalde Estates just south of the urban center. These features help place the city within the wider road network without turning the map into a list of every local road.
The blue drainage lines are almost as important as the roads, especially north of Uvalde. Small tributaries branch repeatedly through the higher terrain, and longer channels continue south on both the western and eastern sides. The difference between the twisting northern drainage and the broader southern road corridor becomes even clearer on the elevation map.
Uvalde and Sabinal are the two ranked city references
The ranked-city map simplifies Uvalde County to two major mapped communities. Uvalde is number 1 in the south-central area, and Sabinal is number 2 farther east. Their separation makes the east-west settlement pattern easy to see. For readers who only need the location of the county’s two main ranked cities, this view is much cleaner than the full road map.
The CITY INDEX prints map values of 15,417 for Uvalde and 799 for Sabinal. These figures explain the ranking and symbol order used in the supplied graphic and should be treated as map values rather than guaranteed current population estimates. For geographic use, the important point is the large difference in scale between the Uvalde urban center and Sabinal’s smaller eastern settlement role.
The surrounding county labels add useful regional context. Real and Edwards counties are north of Uvalde County, while Medina and Bandera counties lie to the east. Kinney County is on the west, Zavala County is southwest, and Frio County is southeast. This frame shows why Uvalde works as a useful south-central reference between several different county directions.
Nueces, Frio, and Sabinal rivers descend through separate valley systems
The western water system is dominated by Nueces River and West Nueces River. Both descend from the rugged western and northwestern interior and continue toward the lower southwestern side. Numerous smaller tributaries join them from the surrounding ridges, which helps explain why that side of the elevation map is so deeply dissected.
Near the center, Dry Frio River and Frio River form two major north-to-south corridors. Frio River comes out of the high northern terrain, while Dry Frio River follows a separate valley farther west. Leona River is labeled in the southern interior and provides another useful water reference closer to the lower country around Uvalde.
Sabinal River defines the eastern side of the county’s water geography. It runs south through a long valley, accompanied by named tributaries such as Blanco Creek, Montell Creek, and Elm Creek. Lake Creek appears in the northwest, while Willingham Lake, V Bar Lake, and Kincaid Lake are labeled farther south. The county is therefore best understood as a set of parallel river and creek valleys rather than a landscape organized around one large lake.
This layer is intended for geographic water and terrain reference rather than flood-risk analysis, navigation, water depth, parcel boundaries, or water-management decisions. Its main value here is to show how separate river valleys cross the county from the northern uplands toward the much lower southern half.
Northern ridges rise far above the broad southern lowlands
The elevation map reports an actual range of about 202 to 669 meters and a mean elevation of 360 meters. The darkest brown high ground covers much of the northern third of the county, especially the northwest and northeast ridge systems. Moving south, the colors shift through tan and yellow-green before broad green lowlands dominate the lower half.
The northern high country is not one continuous plateau. Narrow river and creek valleys cut deeply between the ridges, creating a strongly dissected surface. The Nueces and Frio systems follow some of the most obvious low corridors. Around Uvalde and east toward Sabinal, the terrain becomes much broader and gentler, which also explains why the road network appears straighter and less constrained than it does farther north.
This countywide elevation surface is designed for broad terrain comparison rather than parcel surveying, engineering, or construction design. It is useful for seeing how quickly the land rises north of Uvalde, where the major river valleys cut through the uplands, and why the Uvalde–Sabinal corridor is much flatter than the northern interior. Exact site elevation should be checked with detailed source data or a local survey.
Choose the view by whether roads, cities, river valleys, or relief matters most
Use the county reference map when Uvalde, Knippa, Sabinal, major road labels, and the county boundary need to appear together. The ranked-city view is cleaner for comparing Uvalde and Sabinal. The terrain-and-water layer is the best place to trace the Nueces, Frio, Sabinal, and Leona river systems, while the elevation map makes the high northern ridges and low southern terrain easiest to compare.
The downloadable ZIP contains four separate high-resolution A3 JPG files for Uvalde County: county reference, ranked city, terrain and water, and elevation. You can inspect the lighter WebP versions in the article first and then use the larger JPG files for printing, classroom material, presentations, or an editable local-reference document.
Frequently Asked Questions
Where is Sabinal compared with Uvalde?
Sabinal is east of Uvalde on the supplied maps. Knippa lies between them on the US 90 corridor and provides a useful intermediate location reference.
Which rivers are the main water references in Uvalde County?
The supplied water map prominently labels Nueces River and West Nueces River in the west, Frio River and Dry Frio River in the center, and Sabinal River in the east. Leona River is another named southern water reference.
What elevation range is shown for Uvalde County?
The supplied elevation map states an actual range of about 202 to 669 meters and a mean elevation of 360 meters. The north is much higher and more rugged, while the south around Uvalde and Sabinal is lower and broader.
Map File Information
The ZIP contains the four Uvalde County maps in high-resolution A3 JPG format.
- Included Versions: County reference, ranked city, terrain and water, elevation
- Included Files: 4 A3 JPG maps
Related Maps
Sources and data references
Roads, settlement locations, and the Uvalde County boundary can be cross-checked with the U.S. Census Bureau TIGER/Line Shapefiles. Nueces River, Frio River, Sabinal River, named creeks, and small lakes can be checked against USGS National Hydrography, while terrain height data are available through the USGS 3D Elevation Program. City index values, route references, named waters, and the 202–669 meter elevation range described above are based on the Uvalde County maps supplied in this package.
Green Map creates custom-edited map images using open geographic data sources such as geoBoundaries, Natural Earth, OpenStreetMap, and government open data.
These maps are edited visual materials, not raw data files, and are provided for education, documents, presentations, and graphic reference.
