Jackson County combines the large eastern city of Seymour with Brownstown near the middle, Medora in the southwest, Crothersville in the southeast, and smaller communities across the north. You can download the high-resolution JPG ZIP directly from this page when you need larger road labels, stream names, relief colors, or printable originals. This Jackson County Indiana Map page connects the road network around Seymour and Brownstown with the East Fork White River lowland, the Muscatatuck drainage along the south, and the much higher hill country across the western side.
Seymour is the easiest eastern reference because its developed area is much larger than the surrounding towns and U.S. 31 and I-65 pass nearby. Brownstown lies farther west along the U.S. 50 corridor and provides a central county reference. Medora is southwest of Brownstown, while Crothersville is south of Seymour near the eastern side. Freetown, Cortland, Rockford, and Reddington form a looser northern pattern with much larger gaps between settlement labels.
The terrain views show a strong contrast that is easy to miss on the road map. The elevation legend gives an actual county range of about 152 to 295 meters and a mean of 189 meters. High brown ridges dominate the west and northwest, while a broad green lowland follows the East Fork White River through the center and toward the east. The Muscatatuck system creates additional low corridors along the south, so the county contains both steep-looking hill country and wide river lowlands within one boundary.
Table of Contents
Seymour and Brownstown make the U.S. 50, U.S. 31, and I-65 network easy to follow
The general county map makes Seymour the strongest urban reference. U.S. 31 runs north-south on the eastern side, and I-65 passes close to Seymour along a similar direction. State Road 11 continues south from the Seymour area. The map also labels the Jackson County Superior Court in Seymour, which provides another obvious landmark for the eastern city center.
Brownstown lies west of Seymour and is a useful central reference along the U.S. 50 corridor. State Road 135 extends south from the Brownstown area, while roads toward Medora and Vallonia lead farther southwest. Brownstown is also the county seat, according to Indiana State Library and state county information. That administrative role is separate from city size, but it helps explain why Brownstown is a practical reference point for the middle of the county.
The northern part of the county is much less urban. Freetown lies toward the northwest-central area, Cortland is farther east, Rockford is near the Seymour side, and Reddington is close to the northeastern edge. State Roads 58 and 258 provide useful road references across the north. The wider gaps between communities contrast sharply with the developed Seymour area.
Medora and Crothersville define opposite parts of the southern half. Medora is in the southwest near State Roads 150 and 235, while Crothersville is in the southeast closer to U.S. 31 and I-65. Vallonia sits south of Brownstown and helps connect the central and southwestern portions. The southern county boundary bends repeatedly rather than following a straight line, a shape that becomes easier to understand on the water map where the Muscatatuck system is visible.
The city-connections map compares Brownstown, Crothersville, and Medora with Seymour
The supplied city-connections map uses Seymour as the hub and highlights Brownstown, Crothersville, and Medora. Seymour is printed with an index value of 22,371, Brownstown with 3,040, Crothersville with 1,720, and Medora with 817. These figures are best treated as the values printed on the supplied map rather than as a guarantee of the newest population estimates. The map’s strongest feature is the simple direction-and-distance comparison from the hub.
| Map rank | City | Value printed on map | Straight-line distance from Seymour | Direction |
|---|---|---|---|---|
| 1 | Seymour | 22,371 | Hub | East-central |
| 2 | Brownstown | 3,040 | 10 mi | West |
| 3 | Crothersville | 1,720 | 11 mi | South |
| 4 | Medora | 817 | 18 mi | Southwest |
The 10-, 11-, and 18-mile labels are straight-line distances between mapped city points, not road-driving distances. Actual travel depends on the route and the exact starting and ending locations. Brownstown is the nearest highlighted western destination, Crothersville is south of Seymour, and Medora is farther away in the southwest. The general map should be used alongside this view when the route itself matters.
The city-connections map is not a commuting, traffic-volume, or municipal-boundary product. The circles and labels are designed to compare the four highlighted places. They should not be used to define the full developed footprint of Seymour or the legal boundaries of Brownstown, Crothersville, or Medora.
East Fork White River forms the central lowland while the Muscatatuck system crosses the south
The terrain-and-water map makes the East Fork White River the main interior water reference. It crosses the county diagonally through a broad low corridor and receives numerous smaller streams. Once Brownstown and Seymour have been located on the general map, the river helps explain why the middle of the county looks much flatter and lower than the western hill country.
The northwest is very different. Little Salt Creek and South Fork Salt Creek wind through a more dissected landscape, and White Creek and Guthrie Creek provide additional western references. The shaded terrain around these streams shows short ridges and narrow valleys instead of the broad open lowland around the East Fork White River.
Along the south, Muscatatuck River and Vernon Fork Muscatatuck River create another set of low corridors. Pond Creek and Grassy Creek are among the smaller named streams in the same general area. The winding southern county edge becomes easier to recognize when those rivers are visible, because the boundary and the drainage network bend through the same part of the map.
Peters Lake is labeled in the northeast. It is a relatively small water feature rather than a county-scale lake, but it provides a useful landmark when city names are absent from the terrain map. Together with the East Fork White River and the southeastern streams, it helps divide the broad eastern lowland into recognizable sections.
This water map is intended for geographic reference, not for flood-zone, navigation, legal-boundary, current water-level, or water-quality decisions. A blue line or water polygon does not establish a floodplain or property boundary. Those questions require current agency data. Here, the map is best used to see where the major rivers and creeks lie relative to the hill country and lowlands.
The 152–295 m elevation surface contrasts western hill country with the central and eastern lowlands
The elevation legend gives an actual county range of about 152 to 295 meters and a mean of 189 meters. Greens mark lower terrain, while yellow, tan, and brown show higher ground. The western and northwestern parts of the county contain the broadest and darkest high areas. In contrast, the middle and east are dominated by green lowlands associated with the East Fork White River and its tributaries.
The western hills are strongly dissected. Short valleys cut into the high ground from many directions, and the Salt Creek system occupies several of those lower corridors. Around the Medora and Freetown side of the county, ridges rise quickly above the stream valleys. This gives the west a much rougher appearance than the wide lowlands farther east.
The broad central green area follows the same general corridor as the East Fork White River. Around Brownstown and toward Seymour, the low terrain is wider and smoother than the western hill country. Small ridges and creek cuts are still visible, but at county scale the difference between the western uplands and the central-eastern lowland is the dominant relief feature.
The south-central part of the county contains isolated higher ridges within otherwise lower terrain, and additional narrow ridges appear farther southeast. Muscatatuck River and Vernon Fork Muscatatuck River occupy lower green corridors around those raised areas. Jackson County is therefore more varied than a simple “high west, low east” description: the broad trend is real, but individual hills and river valleys add important local relief.
The 152–295 m range is a county-scale reference, not a survey measurement for a property or engineering project. Building elevations, road grades, drainage design, and parcel-level work require source elevation data or professional surveying. The USGS 3D Elevation Program is a more appropriate starting point for precise terrain information. The supplied image is designed for broad comparison of hills, river valleys, and lowlands.
Use the general map for roads, the city map for direct distances, and the terrain views for rivers and relief
For first-time orientation, begin with the general map. Find Seymour in the east, follow U.S. 50 toward Brownstown, then place Medora to the southwest and Crothersville to the southeast. Freetown, Cortland, Rockford, and Reddington provide northern references. This view contains the broadest selection of roads and place labels.
Use the city-connections map when the question is specifically how Brownstown, Crothersville, and Medora relate to Seymour. The supplied map shows straight-line distances of roughly 10, 11, and 18 miles, respectively. Driving distances are different, so travel planning should use current navigation or road information.
For physical geography, locate East Fork White River first, then compare the Salt Creek system in the northwest and the Muscatatuck rivers in the south. Open the elevation map beside the water map and look for the same channels as green lowlands. That side-by-side comparison makes the western hills and the broad central-eastern valley system much easier to understand.
The web previews are optimized for quick page viewing. Small creek labels, road numbers, and fine relief changes are easier to see in the original files. The download archive contains the county/general map, city-connections map, terrain-and-water map, and elevation map as 3638×2572-pixel JPG originals. Download the ZIP when you want to zoom farther, print the maps, or compare the full-resolution originals side by side.
A useful comparison method is to follow the same place through several views. Find Seymour and Brownstown on the general map, compare their direction and distance on the city map, then switch to the water map to locate East Fork White River. Finally, check the elevation surface to see how the broad river lowland differs from the western hill country. Repeating the same locations across several maps turns separate images into a clearer picture of Jackson County.
Frequently Asked Questions
How far are Brownstown, Crothersville, and Medora from Seymour on the city-connections map?
The supplied map shows Brownstown about 10 miles west of Seymour, Crothersville about 11 miles south, and Medora about 18 miles southwest. These are straight-line distances between mapped city points, not road-driving distances. Actual travel distance depends on the route and the exact starting and ending locations.
Which waterways are easiest to recognize on the Jackson County map?
East Fork White River is the main central reference. Little Salt Creek and South Fork Salt Creek are prominent in the northwest, while Muscatatuck River and Vernon Fork Muscatatuck River define important southern drainage corridors. The water map is intended for geographic reference and should not be used to determine flood risk or legal water boundaries.
Can the 152–295 m elevation range be used as an exact property elevation?
No. The supplied elevation map gives a county-wide range of about 152 to 295 meters, with a mean of 189 meters. It is intended to compare the western hills with the central and eastern lowlands. Exact property, construction, drainage, or engineering elevations require source elevation data or professional survey work.
Map File Information
This ZIP contains the Jackson County general map, city-connections map, terrain-and-water map, and elevation map as high-resolution JPG originals for enlarged viewing and printing.
- File Type: ZIP containing four 3638×2572px JPG files
Related Maps
Sources and References
The article is based primarily on the supplied Jackson County map set and asset manifest. The following official and trusted sources provide county, local-history, natural-area, boundary, and elevation references.
- Jackson County Government, Indiana – official county government site
- Indiana State Library – Jackson County – county-seat and county-history reference
- U.S. Fish & Wildlife Service – Muscatatuck National Wildlife Refuge – official natural-area information near Seymour
- U.S. Census Bureau TIGER/Line Shapefiles – boundary and geographic reference data
- USGS 3D Elevation Program – elevation source data
Green Map creates custom-edited map images using open geographic data sources such as geoBoundaries, Natural Earth, OpenStreetMap, and government open data.
These maps are edited visual materials, not raw data files, and are provided for education, documents, presentations, and graphic reference.
