Morton County sits at the southwestern corner of Kansas, where a geometric grid of cultivated fields meets the more irregular grassland and shrub cover of the Cimarron River corridor. Four maps let you compare those settings without treating every open-looking area as the same land-cover type.
Use the 2025 cover map, the forest-and-farmland view, the impervious-surface map, and the 1985–2025 class comparison together. The original JPG versions of all four maps are available as a single ZIP download farther down the page.
Table of Contents
Begin with the Cimarron corridor, not the county boundary
Across the southern half of Morton County, a diagonal zone of muted brown and pale green interrupts the straighter geometry farther north. This is the most distinctive visual feature in the 2025 land-cover map. It follows the broad setting of the Cimarron River corridor rather than the right-angled edges of agricultural blocks.
Water is not the main color in that corridor. The more useful clue is how the vegetation types gather around a recognizable landform. Small teal sections appear close to the drainage, while shrubland and grassland extend beyond them. Reading the strips separately keeps a narrow wetland feature from being mistaken for a large permanent river channel.
Morton County is home to Elkhart, Rolla, and Richfield, according to its official county information. Elkhart, near the Oklahoma state line, provides a practical reference for the compact built-up area toward the county’s southwestern edge. Other small developed spots should not be assigned town names from color alone.
Cimarron National Grassland extends across parts of Morton and Stevens counties. State wildlife officials describe grasslands, sagebrush, yucca, rocky outcrops, and cottonwoods near the Cimarron River. Those features offer useful context for the patchwork in the maps, but a land-cover classification cannot identify an individual plant species in each mapped cell.
A historical layer adds further context. The National Park Service identifies a section of the Santa Fe Trail’s Cimarron Route within the grassland. That heritage is relevant to how people encounter the landscape today; it should not be confused with evidence that modern land-cover boundaries were created by the historic route.
A 2025 county map shaped by fields and open vegetation
Agriculture occupies 48.66% of the supplied 2025 map, making it the largest category. Grassland follows at 37.40%, with shrubland at 9.82%, developed cover at 3.53%, and wetlands at 0.53%. These values describe the classification of the county surface, not ownership, zoning, grazing permits, or crop yields.
Toward the northern edge, many of the yellow areas have straight sides and form repeated rectangular blocks. Their scale and alignment are unlike the less regular vegetation patterns farther south. Smaller patches of pale green remain among the fields, so the agricultural grid is not a completely uniform surface.

Farther into the central county, the agricultural pattern becomes more broken. The boundary between broad fields and open vegetation is not a single hard line. Instead, yellow blocks alternate with grassland and shrubland near the corridor. That transition is a useful place to compare the legend with the actual colored cells.
Grassland appears both as larger southern stretches and as smaller areas within the northern agricultural matrix. It would be misleading to infer that the entire northern region is cultivated or that all southern acreage is unmanaged prairie. The land-cover product records a dominant surface category for each cell, not the current management of every property.
Shrubland is distinct from grassland in the legend. Its 9.82% share matters because brown areas along the Cimarron corridor would otherwise disappear into an overly simple “open land” description. A mix of shrubland and grassland is consistent with the grassland setting described by Kansas wildlife sources, though the map itself does not identify specific shrubs.
Small wetlands occupy 0.53% of the county. Their narrow distribution can be visually important even when their total area is modest. The colored portions do not certify water throughout the year or guarantee a wetland boundary suitable for regulation; field observations and current hydrological records would be needed for that.
The forest–farmland view clarifies what yellow does not show
In the second map, crop blocks, pasture or hay, shrub and grass vegetation, wetlands, and water appear in a more agricultural reading frame. The northern grid stands out strongly in yellow, while a band of darker open vegetation follows the river landscape. Comparing it to the general cover map is more informative than viewing either image alone.
Near the central transition, fields have uneven edges where they meet other mapped vegetation classes. Those changes in color may coincide with landforms, property decisions, or vegetation conditions. The raster cannot tell which factor dominates. It provides a spatial pattern that a reader can investigate with more detailed evidence.

Forest is shown as 0.00% in the map summary. That rounded figure is not proof that trees are absent from Morton County. The Kansas Department of Wildlife and Parks specifically mentions cottonwood groves and riparian vegetation in the Cimarron National Grassland. Narrow tree lines may fall below the scale or definition required for a cell to count as forest.
Open water is also only 0.02% in the forest-and-farmland summary. Small channels and pools can matter locally without covering a large proportion of the county. Readers comparing the map with a recent aerial photograph should expect some differences in visible water, especially where streams and wet areas vary over time.
Pasture and hay should not be assumed wherever pale green appears on the general cover map. Each panel uses its own legend and may group vegetation differently. Read the class names before assigning agricultural practices to a particular block; satellite classification is not a field-by-field farm inventory.
One effective comparison is to select a yellow block in the north and find the same location in both maps. If it remains within the crop-dominated region, the two panels reinforce that broad interpretation. If adjacent pixels change color, the difference may simply reflect how the products group classes.
Elkhart and the narrow footprint of impervious surfaces
Most of the impervious-surface map is very pale. It estimates that just 0.53% of the county surface is impervious on average. Buildings and paved surfaces occupy relatively limited space compared with fields, grassland, and shrubland. Darker cells are concentrated around small settled locations and along thin transportation lines.
Near Elkhart, a stronger orange and red patch makes the town easier to recognize than it is in the agricultural panel. Some roads connect small marks into long lines across otherwise pale territory. A visible line is not a statement about how wide the road is; map cells generalize features over a fixed area.

Only 0.10% of the county is shown in the 50%-or-greater impervious group. This differs from the 3.53% developed-cover share because a developed cell can still contain lawns, exposed soil, or other permeable surfaces. One number is a surface fraction; the other is a land-cover category.
On the northern grid, the thin road pattern looks more extensive than the very small fraction of the county covered by pavement might suggest. Long lines can cross a wide landscape while occupying little total area. Intersections and compact building clusters are more informative for locating relatively dense hard surfaces.
Farther south, road-like lines cross the grass and shrub cover without turning entire surrounding corridors into developed land. Read the narrow orange strokes separately from nearby vegetation. Even when two features touch on the map, that proximity does not prove one caused the other.
For drainage, planning, or classroom work, this view is a starting map rather than an engineering measurement. Driveways, new roofs, and other small features may be simplified, while changes after the mapping year are not captured. Site-level decisions require newer imagery and local records.
A 23.15% class difference needs careful reading
Between the endpoints 1985 and 2025, 23.15% of Morton County is assigned different land-cover classes in the supplied change map. This is a substantial mapped difference, but it is not a claim that nearly one quarter of the county was urbanized. Every category in the legend must be read on its own terms.
Yellow patches are the clearest departure from the neutral background; they indicate agricultural loss in the classification comparison, totaling 17.75%. Many have rectangular shapes distributed across the northern and central parts of the county. The shapes resemble the field geometry visible in the 2025 cover map, making it possible to compare where agricultural classifications differ.

An agricultural-loss label does not establish whether a parcel stopped being farmed, switched crop type, was left fallow, or was classified differently in one of the two years. For that reason the 17.75% should not be published as a measured decline in farm production or a verified loss of working farms.
Along the southern Cimarron corridor, scattered purple areas mark other class differences. Their pattern follows more irregular vegetation than the rectangular changes in the north. These differences may be worth investigating, but the legend itself does not assign a single physical cause to every purple pixel.
Land classified as developed in the comparison accounts for 0.77%, much smaller than the overall 23.15% change. Forest loss is displayed as 0.00%, while other class differences account for 4.53%. A zero after rounding does not rule out every small localized change, just as a positive category total does not establish exactly what happened at each site.
Forty years separate the two endpoints. Land-cover transitions may have occurred more than once during that period, and imagery classification can have uncertainty. Use the map to identify candidate places for follow-up, then examine intermediate-year data and independent evidence before writing a causal history of any individual field.
Read one location across the complete four-map set
Start with a rectangular agricultural block toward the north. In the first map it may be yellow, while the second gives an agriculture-focused depiction of the same area. Then check whether a colored agricultural-loss patch appears there in the historical comparison. Even at the same location, the panels answer different questions.
Next follow the Cimarron corridor through the southern half. Brown shrubland and pale-green grassland remain distinct on the general map, while the agricultural comparison highlights how those areas relate to crop blocks. The change panel adds another question: are the endpoint classes identical or different?
Finally, return to Elkhart. Developed-cover red should be compared with stronger impervious-surface colors, not equated with them. The two layers may overlap in settled areas without matching pixel for pixel. Pavement percentages and developed classes use different measures.
This approach helps separate four kinds of information: current dominant cover, agriculture-oriented vegetation, the fraction of hard surface, and change between historical classifications. A single screenshot cannot represent all four accurately. Keeping legends visible makes the comparison understandable to readers unfamiliar with land-cover mapping.
At county scale, look for contrasts rather than exact parcel boundaries. Crop blocks, the diagonal river zone, and compact town footprints illustrate three different landscape settings in one county. Each is visible at a different scale and becomes more informative when compared with a relevant map panel.
Downloads, useful applications and limitations
One download box provides all four original JPG map views in a single ZIP archive. Retain the legend on each image when using it in a report or slide deck. A cropped excerpt of the southern corridor can be useful, but identify its location within Morton County so the visual context is not lost.
In environmental education, the contrast between cultivated blocks and Cimarron National Grassland invites questions about vegetation, water, and land management. Local resources can then supply the ecological or historical explanations that broad land-cover classes cannot give on their own.
Annual NLCD uses remotely sensed raster data with an approximately 30-meter spatial resolution. Each pixel represents a dominant classification at that scale; a narrow hedgerow, isolated tree, or short road segment may not appear as a separate class. Mixed cover within one pixel is simplified.
A 2025 surface map is also a dated snapshot. Construction, crop rotations, drought conditions, or channel adjustments after that year may be absent. Comparing different mapping products or versions without checking their methods can introduce apparent changes unrelated to land conditions.
These JPG files are reference graphics, not editable GIS layers, official property maps, wetland delineations, or legal zoning decisions. For property-specific actions, consult the county’s current records and qualified local sources. For general geography, the four panels provide a strong visual basis for asking well-defined follow-up questions.
Frequently Asked Questions
Why does the northern half of Morton County look more agricultural?
Large yellow crop-class blocks lie mostly in the north of the supplied map and a more irregular mixture of grassland and shrubland along the southern Cimarron corridor. The pattern is visible, but the map alone cannot explain the management history of individual fields.
Does a 0.00% forest figure mean the Cimarron corridor has no trees?
No. The forest percentage is rounded within this classification, while Kansas wildlife sources describe cottonwoods and riparian vegetation in the grassland. Small or narrow tree stands may not be represented as forest in a 30-meter raster.
Did Morton County lose 17.75% of its working farms between 1985 and 2025?
That conclusion is not supported. The 17.75% label refers to area classified differently from an agricultural category between the map endpoints. It is not a count of farms or a verified measurement of agricultural production.
How can developed cover be 3.53% when mean imperviousness is only 0.53%?
These are different measures. Developed land cover is the share of cells in developed classes; mean imperviousness estimates the prevalence of roofs, pavement and similar hard surfaces. A developed area can also include permeable ground.
Map File Information
Download one ZIP archive containing the four original land-cover map JPG files.
- Included Files: Four original land-cover map JPG files
- File Type: ZIP archive containing four JPG files
- Intended Use: Map comparison, learning, and print reference
Related Maps
- Across the High Plains: Cheyenne County Kansas Land Cover Maps in Four Views
- Allen County Kansas Land Cover Maps | Fields, Iola and Four JPG Views
- Anderson County Kansas Land Cover Maps: Garnett, Wooded Creeks and Fields
Sources and further reading
- Morton County official county information
- Kansas Department of Wildlife and Parks: Cimarron National Grassland
- National Park Service: Cimarron National Grassland and the Santa Fe Trail
- MRLC: Annual NLCD data products
- MRLC: land-cover classification and legend
Green Map creates custom-edited map images using open geographic data sources such as geoBoundaries, Natural Earth, OpenStreetMap, and government open data. These maps are edited visual materials, not raw data files, and are provided for education, documents, presentations, and graphic reference.





